Industrial mobile dust collectors are suitable for various independent dust generation points. They are flexible and convenient. They can collect and process dust on the spot. They can effectively ensure the cleanliness of the air and are widely used in purification and dust removal in certification projects. The basic structure of this dust collector consists of a dust removal box, a centrifugal fan, a filter bag (filter cartridge), a dust collector and a microcomputer controller. The dust suction pipe can be adjusted up and down as needed, and rotated to a certain degree, and can be powered by a power supply. The product is novel , practical, stable performance, easy to use and maintain. Working Principle: Dust is sucked into the dust collector box through the vacuum duct under negative pressure from the fan. Using gravity and upward airflow, first, the coarse dust is filtered by the filter (filter cartridge) and directly dropped to the dust collector. The fine dust is captured by the filter element. Collected on the outer surface, the clean gas is filtered, decomposed and purified by the filter element and then flows into the clean room, where it is discharged from the air outlet by the fan. The entire dust removal and filtration is the result of the comprehensive effects of gravity, inertial force, collision, electrostatic adsorption, sieving, etc. After the dust collector has been working continuously for a period of time, the dust on the surface of the filter bag (filter cartridge) continues to increase, and then the dust is cleaned, and the dust is shaken off in the dust collector (drawer), and then processed manually.
Industrial mobile dust collector