The welding dust collector is a purification device specially designed for industrial welding fume and light particles. It is light, flexible and easy to operate. It is also widely used in chemical industry, electronics, metal processing, tobacco, glass, pharmaceuticals, food processing, purification Rooms, hospitals and other industries and other places with dust and smoke pollution. Metals will produce a variety of toxic and harmful gases during industrial welding or other processing. Welding smoke purifiers, welding smoke purifiers, and processing characteristics of the gases in the smoke, we will conduct experiments to ensure that no secondary pollution will occur. . Use multi-stage purification devices to purify welding smoke and waste gas, which can not only effectively remove welding smoke and waste gas, but also degrade the tar smell of welding smoke and various toxic and harmful gases. Arc welding, shielded welding, shielded welding, special welding, gas fusion cutting, etc. are used to treat the fumes generated during the welding and polishing of carbon steel, stainless steel, aluminum and other metals, and the production of other chemicals.
The dust contained in the welding dust collector enters the purifier through the negative pressure generated by the fan through the side exhaust port and the lower exhaust port. It has a high purification efficiency for suspended dust, dust above sub-micron. The airflow enters the diversion channel, and a large After the particle dust collides with the guide plate, the large particle dust falls into the dust collecting drawer under the action of gravity, and the dust containing fine particles enters the filter chamber. The dust-containing gas passes through the filter element from the outer surface of the filter bag, and the dust is blocked by the filter element in its interior. On the surface, when the blocked dust continues to deposit on the surface of the filter element, the filter element can be cleaned by manually vibrating the dust cleaning structure, or the filter cartridge can be dusted by pulse injection so that the dust particles deposited on the filter element can be separated from the filter element under the action of vibration. The surface falls into the dust collection drawer, so that the entire filter element surface is cleaned, and the purified air is discharged from the air duct and the fan.
Technical parameters of welding dust collector (reference)
<> Serial number
<> Specification model
<> Filtration area
<> Processing air volume (3/)
<> Filtration wind speed
<> Power consumption
<> Purification efficiency ()
Resource pressure
<>
<>
<>
<>
<>
<>
<>
<>
<>
<>
<>
<>
<>
<>
<>
<>
<>
<>
<>
<> .（.）
<>
<>
<> ,
<>
<>
<>
<> (.)
<>
<>
<> 、
<>
<>
<>
<> (.)
<>
<>
<> ,
<>
<>
<>
<> (.)3
<> < br/> <>
<> ,
<>
<>
<>
<> (3.)
<>
<>
<> 、
<>
<>
<>
<> (.)
<>
Note: Fan power supply voltage: / Small power fan can be customized / Non-standard dust collector can also be customized.
Welding dust collector